“鸿基”牌塑料薄膜凹印水性墨，在印刷亮度、附着力、印刷性能已达到溶剂油墨的水平，而且不燃、不爆、无有机溶剂VOC挥发造成的环境污染。特别适用于食品包装用塑料袋的印刷，是油墨行业的发展方向。

　　一、适应基材

　　主要用于PP、PE等塑料薄膜印刷，印刷速度可达3000-5000米/小时。

　　二、主要技术指标

序号	指            标	要        求
1	颜色	与色样相符
2	着色力%	95-105
3	细度um	≤15
4	初干性（mm/30s）	50-110
5	附着牢度/%	≥90
6	粘度/s	50-130

  三、包装规格：

      20kg塑料桶或铁桶

  四、使用注意事项

  1、该水墨不能与油墨或其他水墨混合使用。

  2、墨辊和印版可用清水清洗。时间较长而干固的墨迹，可以用醋酸乙酯、醋酸丁酯溶剂清洗。

  3、该水墨的稀释可以用自来水，最好用纯净水。

HONGJI water-based gravure printing ink for plastic film has already reached the level of printing ink which has organic solvents in aspects of brightness, adhesion and printing property. It is environmental friendly due to the lack of VOC and has characters of no combustion and no explosion. It can be used for printing on food packages, which is a new developmental direction in the field of printing ink.

1）Suitable material

It is mainly used for plastic films such as PP and PE. This ink has rapid drying speed, so it is perfect for printing machines with 3000-8000 m/h printing speed.

2) Mainly technical targets

Number	Types of technical targets	Requirements
1	Colour	Same as samples
2	Dyeing force (%)	95-105
3	Fineness (μm)	≤15
4	Initial dryness（mm/30s）	50-110
5	Adhesion	≥90
6	Viscosity	50-130

3)Package

Plastic or metal buckets with the size of 20 kg.

4) announcements

1.This water-based printing ink can not be combined with others when it is being used.

2. Ink on printing forme and roller can be washed by water. Sticky ink which can not be washed by water on printing forme or roller can be removed byethyl acetate andbutyl acetate.

3. This water-based printing ink can be diluted by tap water, but distilled water would be much better.

4. Do not mix dust into water-based printing ink. The bucket which has already been opened should be sealed to prevent being dry and hard.